ISO 20977-2018 石灰材料--干法和濕法篩分粒度分布的測定 Liming materials — Determination of size distribution by dry and wet sieving
- 標準類別:
- 標準大?。?/li>
- 標準編號:ISO 20977-2018
- 標準狀態:現行
- 更新時間:2023-09-30
- 下載次數:次
This document specifies two methods for the determination of the particle size distribution of liming
materials.
Method A (the dry sieving method) is applicable to all liming materials except wet and paste-like
products. Method A is not applicable if blinding, caking, electrostatic charges or agglomeration occur
after drying.
Method B (the wet sieving method) is applicable to products which are susceptible to blinding, caking,
electrostatic charges or agglomeration after drying. Method B can be used to determine the primary
particle size distribution of granulated products. Method B is not applicable to burnt lime and liming
materials containing water-soluble constituents.st edition
2018-12
Liming materials — Determination of
size distribution by dry and wet sieving
Amendements minéraux basiques — Détermination de la distribution
granulométrique par tamisage à sec ou à l'état humide
Reference number
ISO 20977:2018(E)
?
ISO 2018
ISO 20977:2018(E)
COPYRIGHT PROTECTED DOCUMENT
? ISO 2018
All rights reserved. Unless otherw
-
GB/T 1094.1-2013電力變壓器 第1部分:總則 2023-09-30
-
GB/T 706-2016熱軋型鋼 2023-09-30
-
JB/T 10216-2013電控配電用電纜橋架 2023-09-30
-
GB/T 10801.2-2018絕熱用擠塑聚苯乙烯泡沫塑料(XPS) 2023-09-30
